LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 1996 >> Pickup Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing - 2.4L 4-CYL >> Ignition Checks >> DISTRIBUTORLESS Ignition System (Dis) >> Ignition Coil Resistance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil Resistance

  1. Disconnect ignition coil connector. Using a Digital Volt-Ohmmeter (DVOM), measure primary coil resistance between ignition coil connector terminals No. 2 and 3 (coil for cylinders No. 1 and 4) and terminals No. 1 and 3 (coil for cylinders No. 2 and 3). See Fig 1 .
    Fig 1: Ignition Coil Connector Terminal ID (Eclipse 2.4L)
    G93A78154Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
  2. Remove ignition wires from coil. Measure secondary coil resistance between coil towers for cylinders No. 1 and 4 and between coil towers for cylinders No. 2 and 3. Primary and secondary coil resistance should be within specification. See ECLIPSE IGNITION COIL RESISTANCE  table. Connect coil harness connector. Connect ignition wires to coil.
ECLIPSE IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

Application Primary Secondary
2.4L .74-.90 20,100-27,300
scientia non olet · About LEMON Manuals