LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer Evolution >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 OUTLANTER 3.0L >> Pattern 8 >> Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the vehicle at more than 50 km/h (31 mph) for 1 minute.
  3. Stop at safe place and let the engine idle for 30 seconds.
  4. Repeat Steps 2 and 3 again.
  5. Stop the safe place and turn the ignition switch to "LOCK" (OFF) position.
  6. Confirm that the diagnostic trouble code (DTC) is not output.