Evaporative Emissions Monitor Self Test (MTT-1008-04)
Publication date: 2008-01-01Reference number: MTT-1008-04
EVAPORATIVE EMISSIONS MONITOR SELF TEST
TECHNICAL INFORMATION TIP - MANUFACTURER
Reference Number(s): MTT-1008-04, Date of Issue:
January, 2008
| MITSUBISHI: | All Models |
SERVICE INFORMATION
EVAPORATIVE EMISSIONS MONITOR SELF TEST All Models. In cases where you want to run the evaporative leak monitor self test using the MUT-III, always remember to erase DTCs, even if there are none. Erasing DTCs resets the readiness monitors to INCOMP. The MUT-III will not run the self test if the readiness monitor for EVAP registers as COMP.