Accuracy Check Of Occupant Classification Sensor (MTT-0207-10)

Publication date: 2008-01-01
Reference number: MTT-0207-10

ACCURACY CHECK OF OCCUPANT CLASSIFICATION SENSOR

TECHNICAL INFORMATION TIP - MANUFACTURER

Reference Number(s): MTT-0207-10, Date of Issue: January 01, 2008

MITSUBISHI:

All Models except Raider

SERVICE INFORMATION

Tips From the Toolman

ACCURACY CHECK OF OCCUPANT CLASSIFICATION SENSOR

For all models except Raider, follow the procedures in Group 52B of the appropriate service manual for Accuracy Check of Occupant Classification Sensor.

Use TSB-06-00-010 for Raider.

NOTE FOR ALL MODELS EXCEPT RAIDER: During the accuracy check of the occupant classification sensor, you will be instructed to place 66 - 88 lbs (30 - 40 kg) in the center of the passengers seat. Unlike the Raider, a special tool for this procedure is not available. You could use a combination of weights from the Raider tool kit along with exercise weights to reach the proper weight. See photo below for the weight of each part of the Raider seat weight kit.