LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Lancer LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Computerized Engine Controls >> ECM/Pcm >> Ground Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuits

  1. Turn ignition off. Backprobe and check for continuity between chassis ground and ECM/PCM ground terminal(s). If continuity exists, go to next step. If continuity does not exist, repair open circuit between ECM/PCM connector and chassis ground. Ensure suspect ground connection is clean and tight.
  2. Backprobe and measure voltage between chassis ground and ECM/PCM ground terminal(s). With engine operating at normal operating temperature, voltage should be less than one volt. If voltage is more than one volt, check for open, corrosion or loose connection in ground circuit.
scientia non olet · About LEMON Manuals