Symptom Procedures
- Symptom Procedures
- INSPECTION PROCEDURE 1: Engine does not Crank
- INSPECTION PROCEDURE 2: Does not Move Forward
- INSPECTION PROCEDURE 3: Does not Move Backward
- INSPECTION PROCEDURE 4: Does not Move (Forward or Backward)
- INSPECTION PROCEDURE 5: Engine Stalls when Moving Selector Lever from "N" to "D" or "N" to "R"
- INSPECTION PROCEDURE 6: Shift Shock when Shifting from "N" to "D" and Long Delay
- INSPECTION PROCEDURE 7: Shift Shock when Shifting from "N" to "R" and Long Delay
- INSPECTION PROCEDURE 8: Shift Shock when Shifting from "N" to "D," "N" to "R" and Long Delay
- INSPECTION PROCEDURE 9: Shift Shock and Slipping
- INSPECTION PROCEDURE 10: Early or Late Shifting All Gears
- INSPECTION PROCEDURE 11: Early or Late Shifting Some Gears
- INSPECTION PROCEDURE 12: No Diagnostic Trouble Codes (Does not Shift)
- INSPECTION PROCEDURE 13: Poor Acceleration
- INSPECTION PROCEDURE 14: Vibration
- INSPECTION PROCEDURE 15: Vehicle Shifts Differently with A/C Engaged
- INSPECTION PROCEDURE 16: Transmission won't Downshift Under Load with Auto-cruise Engaged.
- INSPECTION PROCEDURE 17: Shift Switch Assembly System
- INSPECTION PROCEDURE 18: 4LLc Detection Switch System
- Symptom Procedures
- INSPECTION PROCEDURE 1: Selector Lever can be Moved from "P" to "R" Position without Depressing Brake Pedal when Ignition Key is at Positions other than "LOCK" (OFF) Position.
- INSPECTION PROCEDURE 2: Selector Lever cannot be Moved from "P" to "R" Position with Brake Pedal Depressed when Ignition Key is at Positions other than "LOCK" (OFF) Position.
- INSPECTION PROCEDURE 3: Selector Lever can be Moved from "P" to "R" Position with Brake Pedal Depressed when Ignition Key is at "LOCK" (OFF) Position.
- INSPECTION PROCEDURE 4: Selector Lever cannot be Moved from "P" to "R" Position Smoothly.
- INSPECTION PROCEDURE 5: Selector Lever cannot be Moved from "R" Position to "P" Position.
- INSPECTION PROCEDURE 6: Ignition Key cannot be Turned to "LOCK" (OFF) Position when Selector Lever is at "P" Position.
- INSPECTION PROCEDURE 7: Ignition Key can be Turned to "LOCK" (OFF) Position when Selector at Positions other than "P" Position.