LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Outlander LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Programming >> Immobilizer System >> Function Selection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Selection

  1. Turn ignition switch to OFF position. Connect MUT-II Scan Tool (MB991502) to DLC. See Figure . Turn ignition switch to ON position.
  2. From immobilizer menu, select SPECIAL FUNCTION. To register key identification (encrypted code), see KEY ID REGISTER (ENCRYPTED CODE REGISTRATION)  . To change immobilizer system password, see PASSWORD SET  .
  3. After registration procedure, turn ignition switch to LOCK position and leave off for at least 10 seconds. Ensure each of the ignition keys can start engine. Ensure immobilizer and PCM DTCs do not reset. Turn ignition switch to LOCK position before disconnecting scan tool.
scientia non olet · About LEMON Manuals