LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2003 >> Outlander LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Programming >> Immobilizer System >> Password Set
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Password Set

NOTE: Password must be 4 digits. Each digit must be a value from zero to 9. After password is changed, ensure vehicle owner gets a copy of NEW 4-digit password.
  1. Obtain password from vehicle owner. Connect MUT-II scan tool to DLC. See Figure . See FUNCTION SELECTION  . From special function menu, select PASSWORD SET. Enter current 4-digit password. Using up and down keys, enter password digit from zero to 9. Using left and right keys, move to next password digit. When password is entered, press "Y" key.
  2. If wrong password is input 5 times in a row, scan tool screen will display CAN'T EXECUTE FOR 20 MIN. DUE TO WRONG PASSWORD. Immobilizer-ECU will switch to start-prevention mode.
  3. If correct password is entered, screen will display PLEASE ENTER A NEW PASSWORD. Enter new 4-digit password as described in step  1 . After new password is entered, press "Y" key.
  4. If new password is successfully registered, scan tool screen will display COMPLETED. If new password is not successfully registered, scan tool screen will display CAN'T EXECUTE. Repeat procedure.
scientia non olet · About LEMON Manuals