LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Supply - Evolution >> Fuel Tank >> Inspection >> Fuel Tank Rollover Valve Assembly Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Tank Rollover Valve Assembly Check

  1. Shake the fuel tank rollover valve assembly up and down to check the float inside the fuel tank rollover valve assembly is not seized.
    Fig 1: Shaking Fuel Tank Rollover Valve Assembly
    G00984275Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Obtain a container, which is full of water.
  3. Invert the fuel tank rollover valve assembly, and submerge it slowly in the water while placing your fingers over the nozzle.
  4. Check that no more air bubbles appears from the fuel tank rollover valve assembly, and withdraw it slowly.
    Fig 2: Checking Fuel Tank Rollover Valve Assembly For Air Bubbles
    G00984276Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Open the fuel tank rollover valve assembly nozzle. If no water flows out from the nozzle aperture, the valve is normal. If water flows out, the float or spring inside the fuel tank rollover valve is defective. Replace the fuel tank rollover valve assembly.
    Fig 3: Identifying Normal/Defective Fuel Tank Rollover Valve Assembly
    G00984277Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals