LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 OUTLANTER 3.0L >> Pattern 12 >> Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Let the engine idle for 6 minutes.
  3. Drive the vehicle for 30 seconds at the following conditions. (During the monitor)
    • Engine speed: More than 1,200 r/m
    • Engine load: More than 30%
    • Throttle position sensor output: Less than 4.0 volts
    • Except fuel cut
  4. Stop the safe place and turn the ignition switch to "LOCK" (OFF) position.
  5. Confirm that the diagnostic trouble code (DTC) is not output.