Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Engine control system | |
| Accelerator pedal bracket installation | 12 +/- 2 N.m (100 +/- 22 in-lb) |
| Bracket nut | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Auto-cruise control system | |
| Auto-cruise control-ECU installation nut | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Emission control system < 2.4L ENGINE > | |
| Center exhaust pipe nut | 59 +/- 10 N.m (44 +/- 7 ft-lb) |
| EGR valve bolt | 19 +/- 3 N.m (14 +/- 2 ft-lb) |
| Front exhaust pipe nut | 49 +/- 10 N.m (37 +/- 7 ft-lb) |
| Hanger bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Heated oxygen sensor | 44 +/- 5 N.m (33 +/- 3 ft-lb) |
| Emission control system <3.0L Engine> | |
| Center exhaust pipe nut | 59 +/- 10 N.m (44 +/- 7 ft-lb) |
| EGR valve bolt | 22 +/- 4 N.m (16 +/- 3 ft-lb) |
| Exhaust fitting stay (M8) | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Exhaust fitting stay (M12) | 32 +/- 7 N.m (24 +/- 5 ft-lb) |
| Front exhaust pipe nut | 49 +/- 9 N.m (37 +/- 6 ft-lb) |
| Hanger bolt | 12 +/- 2 N.m (107 +/- 17 in-lb) |
| Heated oxygen sensor | 44 +/- 5 N.m (33 +/- 3 ft-lb) |
| Warm-up three-way catalytic converter nut | 35 +/- 4 N.m (26 +/- 3 ft-lb) |