Individual Component Service
WARNING:
- If heat damage may occur during paint work, remove the SRS-ECU, the air bag module, the clock spring, the seat belt with pre-tensioner. Recheck the SRS system operability after reinstalling them (Refer to 20. SRS AIR BAG (INSPECT FOR SRS SYSTEM)
.)
- SRS-ECU, air bag module, clock spring: 93°C (200 ° F) or more
- Seat belt with pre-tensioner: 90°C(194°F) or more
- If the SRS components are removed for the purpose of check, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.
If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure in this section (SRS-ECU: refer to SRS CONTROL UNIT (SRS-ECU) , Air Bag Modules and Clock Spring: refer to AIR BAG MODULES AND CLOCK SPRING , Side impact sensor: refer to SIDE IMPACT SENSOR , Seat Belt with Pre-tensioner: refer to SEAT BELTS WITH PRE-TENSIONER .)