Chassis Electrical - Lancer Evolution
- Battery
- Ignition Switch
- General Description
- Ignition Key Reminder Torn Alarm
- Immobilizer System Diagnosis
- Introduction To Immobilizer System Diagnosis
- Immobilizer System Diagnostic Troubleshooting Strategy
- Diagnosis Function
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- Symptom Chart
- Symptom Procedures
- Data List Reference Table
- Check At Immobilizer-Ecu
- Special Tools
- On-Vehicle Service
- Ignition Switch
- Combination Meter Assembly And Vehicle Speed Sensor
- Equipment Diagnosis
- Introduction To Combination Meter Diagnosis
- Troubleshooting Strategy
- Symptom Chart
- Symptom Procedures
- Special Tools
- On-Vehicle Service
- Combination Meter Assembly And Vehicle Speed Sensor
- Equipment Diagnosis
- Headlight, Front Side Marker Light And Position Light Assembly
- Turn-Signal Light
- Rear Combination Light
- Dome Light
- High-Mounted Stoplight
- License Plate Light
- Hazard Warning Light Switch
- Rheostat
- Column Switch
- Horn
- Cigarette Lighter And Accessory Socket
- Clock
- Radio And Tape Player
- Radio With Tape Player And Cd Player, Speaker And Antenna Diagnosis
- Introduction To Audio System Diagnosis
- Troubleshooting Strategy
- Symptom Chart
- Symptom Procedures
- INSPECTION PROCEDURE 1: When Power Switch is Turned "ON," No Power is Available.
- INSPECTION PROCEDURE 2: No Sound < Vehicles with Audio Amplifier >
- INSPECTION PROCEDURE 3: No sound From One Speaker
- INSPECTION PROCEDURE 4: No Sound from One Speaker < Vehicles with Audio Amplifier >
- INSPECTION PROCEDURE 5: CD Auto Changer does Not Operate.
- INSPECTION PROCEDURE 6: Noise Appears at Certain Places When Traveling (AM).
- INSPECTION PROCEDURE 7: Noise Appears at Certain Places When Traveling (FM).
- INSPECTION PROCEDURE 8: Mixed With Noise, Only at Night (AM).
- INSPECTION PROCEDURE 9: Broadcasts can be Heard but Both AM and FM have a Lot of Noise.
- INSPECTION PROCEDURE 10: There is More Noise on Either AM or FM.
- INSPECTION PROCEDURE 11: There is Noise When Starting the Engine.
- INSPECTION PROCEDURE 12: Some Noise Appears When There is Vibration or Shocks During Traveling.
- INSPECTION PROCEDURE 13: Noise Sometimes Appears on FM During Traveling.
- INSPECTION PROCEDURE 14: Ever-Present Noise
- INSPECTION PROCEDURE 15: There is Noise but No Reception for Both AM and FM or No Sound from AM, or No Sound from FM.
- INSPECTION PROCEDURE 16: Poor Reception
- INSPECTION PROCEDURE 17: Distortion on AM or on Both AM and FM
- INSPECTION PROCEDURE 18: Distortion on FM Only
- INSPECTION PROCEDURE 19: Using the Auto Select Function, Too Few Automatic Stations are Selected.
- INSPECTION PROCEDURE 20: Preset Stations are Erased.
- INSPECTION PROCEDURE 21: CD Cannot be Inserted.
- INSPECTION PROCEDURE 22: No sound. (CD only)
- INSPECTION PROCEDURE 23: CD Sound Skips.
- INSPECTION PROCEDURE 24: Sound Quality is Poor.
- INSPECTION PROCEDURE 25: CD Cannot be Ejected.
- Special Tools
- On-Vehicle Service
- Radio And Tape Player
- Radio With Tape Player And Cd Player, Speaker And Antenna Diagnosis
- Speaker
- Amplifier < Vehicles With Amplifier >
- Antenna
- Rear Window Defogger
- Specifications