Removal And Installation: Notes
WARNING:
- Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
- Do not drop the air bag modules or clock spring or allow contact with water, grease or oil.
- Replace it if a dent, crack, deformation or rust is detected.
- The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of it.
- Do not expose the air bag modules to temperatures over 93°C (200°F).
- After deployment of an air bag, replace the air bag modules. Check the clock spring and if faulty, replace it with a new part.
- Wear gloves and safety glasses when handling air bags that have already deployed.
- An undeployed air bag module should only be disposed of in accordance with the procedures described on AIR BAG MODULE AND SEAT BELT PRE-TENSIONER DISPOSAL PROCEDURES .