Auto-Cruise Control
- Auto-Cruise Control
- General Description
- Construction Diagram
- Auto-Cruise Control System Diagnosis
- Diagnostic Troubleshooting Strategy
- Diagnostic Function
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: When The Brake Pedal Is Depressed, Auto-Cruise Control System Is Not Cancelled
- Inspection Procedure 2: When Clutch Pedal Is Depressed, Auto-Cruise Control System Is Not Cancelled < M/T >
- Inspection Procedure 3: When The Selector Lever Is Moved To "N" Position, Auto-Cruise Control System Is Not Cancelled < A/T >
- Inspection Procedure 4: When The Auto-Cruise Control "Cancel" Switch Is Set To On, Auto-Cruise Control System Is Not Cancelled
- Inspection Procedure 5: Auto-Cruise Control System Cannot Be Set
- Inspection Procedure 6: Hunting (Repeated Acceleration And Deceleration) Occurs At The Set Vehicle Speed
- Inspection Procedure 7: When "Cruise" (Main) Switch Is Turned "On", "Cruise" Indicator Light Inside Combination Meter Does Not Illuminate (However, Auto-Cruise Control System Is Normal)
- Data List Reference Table
- ECM < M/T > Or Pcm < A/T > Terminal Voltage Reference Chart For Auto-Cruise Control System Operation
- Removal And Installation
- Special Tools
- On-Vehicle Service