Option Coding
CAUTION:
- If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Functions and systems do not work normally if the setting does not correspond with the equipment.
- With the ETACS functions being customized, if any of the ETACS-ECU variant coding and option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.
The ETACS-ECU option coding data can be checked or changed by operating scan tool MB991958.
- How to check option coding data
- Connect the scan tool MB991958. Refer to CODING LIST .
- Turn the ignition switch to the "ON" position.
- Select "System select" from the start-up screen.
- Select "From 2006 MY" under "Model Year". Check that "Vehicle Information" contents are correct.
- Select "ETACS" from "System List", and then press "OK" button.NOTE: If "Loading Option Setup" list is shown, click appropriate box.
- Select "Coding".
- Select "Option Coding Information".
- Check the displayed option coding information.
- How to change option coding data
- Connect the scan tool MB991958.
- Turn the ignition switch to the "ON" position.
- Select "System select" from the start-up screen.
- Select "From 2006 MY" under "Model Year". Check that "Vehicle Information" contents are correct.
- Select "ETACS" from "System List", and then press "OK" button.NOTE: If "Loading Option Setup" list is shown, click appropriate box.
- Select "Coding".
- Select "Option Coding".
- Change to correct option coding data.
LIST
Item name
- Number of speaker
- Seat material
- Auto light control
- AUDIO (CAN)
- AND
- HFM (hands free-ECU)
- Rain Light Sensor
- Front fog light
- Rear fog light
- Horn type
- Manner switch
- Remote engine starter
- Wiper washer check bulb
- Compressor type
- Satellite Radio
- DRL function
- Keyless