<3.8L Engine>
FASTENER TIGHTENING SPECIFICATIONS - 3.8L ENGINE
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Control wiring harness nut | 12 ± 2 N.m (102 ± 22 in-lb) |
| Engine oil dipstick and dipstick guide bolt | 14 ± 1 N.m (120 ± 13 in-lb) |
| Generator bolt | 49 ± 9 N.m (36 ± 7 ft-lb) |
| Generator bracket bolt | 49 ± 9 N.m (36 ± 7 ft-lb) |
| Harness bracket bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Crankshaft position sensor bolt | 8.5 ± 0.5 N.m (76 ± 4 in-lb) |
| Crankshaft position sensor clamp bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Crankshaft position sensor clip bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Ignition coil bolt | 10 ± 2 N.m (89 ± 17 in-lb) |
| Knock sensor | 23 ± 2 N.m (17 ± 1 ft-lb) |
| Knock sensor clip bolt | 11 ± 1 N.m (98 ± 8 in-lb) |
| Spark plug | 25 ± 4 N.m (18 ± 3 ft-lb) |
| Starting system | |
| Starter bolt | 30 ± 3 N.m (23 ± 2 ft-lb) |
| Starter cover bolt | 4.9 ± 1.0 N.m (44 ± 8 in-lb) |
| Starter cover nut | 4.9 ± 1.0 N.m (44 ± 8 in-lb) |
| Starter terminal nut | 12 ± 2 N.m (102 ± 22 in-lb) |