Transaxle Assembly: Remove & Replace

WARNING: This page is about the Outlander ES, AWD, which is a different variant/trim than selected.

Applies To	Note	Standard Hours	Skill Level
In-Line4,AWD	Includes: Confirm Fluid temperature for level check. Includes: Programming.	9.0	C
Combination Procedure: CONVERTER: Drain & Test:
In-Line4		0.2	C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
In-Line4, Rear		0.4	B
Combination Procedure: FLYWHEEL: Remove & Replace:
In-Line4		0.2	C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
In-Line4		0.2	C
Combination Procedure: TRANSAXLE OIL COOLER: Clean:
In-Line4		0.5	C

4, 5 AND 6 SPEED TRANS

Applies To	Note	Standard Hours	Skill Level
AWD	Includes: Confirm Fluid temperature for level check. Includes: Programming.	10.1	C
Combination Procedure: CONVERTER: Drain & Test:
		0.2	C
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.2	C
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
		0.2	C
Combination Procedure: TRANSAXLE OIL COOLER: Clean:
		0.5	C