Diagnostic Trouble Code Chart
CAUTION:
During diagnosis, a DTC associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC (s). If DTC (s) are set, erase them all.
Follow the inspection chart that is appropriate for the diagnostic trouble code.
<ABS/TCL/ASC DTC>
DIAGNOSTIC TROUBLE CODE CHART
| DTC | INSPECTION ITEM (M.U.T.-III SCAN TOOL DISPLAY) | DIAGNOSTIC CONTENT |
|---|---|---|
| C1200 | FR wheel SPD. SNSR. malfunction | Open circuit or short circuit |
| C1201 | FR wheel SPD. SNSR. invalid signal | Abnormal output signal |
| C1205 | FL wheel SPD. SNSR. malfunction | Open circuit or short circuit |
| C1206 | FL wheel SPD. SNSR. invalid signal | Abnormal output signal |
| C1210 | RR wheel SPD. SNSR. malfunction | Open circuit or short circuit |
| C1211 | RR wheel SPD. SNSR. invalid signal | Abnormal output signal |
| C1215 | RL wheel SPD. SNSR. malfunction | Open circuit or short circuit |
| C1216 | RL wheel SPD. SNSR. invalid signal | Abnormal output signal |
| C1226 | FR inlet valve | |
| C1231 | FR outlet valve | |
| C1236 | FL inlet valve | |
| C1241 | FL outlet valve | |
| C1246 | RR inlet valve | |
| C1251 | RR outlet valve | |
| C1256 | RL inlet valve | |
| C1261 | RL outlet valve | |
| C1271 | Motor drive circuit | |
| C1276 | Valve power supply circuit | |
| C1300 | FR cut valve | |
| C1305 | FR suction valve | |
| C1310 | FL cut valve | |
| C1315 | FL suction valve | |
| C1340 | Stoplight switch | |
| C1361 | M/C pressure SNSR. stuck/low gain | |
| C1364 | M/C pressure SNSR. malfunction | |
| C1366 | Lateral G SNSR. stuck/low gain | |
| C1371 | Yaw rate SNSR. stuck/low gain | |
| C1377 | Communication error G and yaw rate SNSR. | |
| C1394 | INCOMP. learn neutral (SAS) | |
| C1395 | INCOMP. Brake fluid filling | |
| C1505 | Steering angle sensor (detected by ASC side) | |
| C1506 | Steering angle sensor error (detected by itself) | |
| C1607 | ECU failure (valve relay cannot activate) | |
| ECU failure (valve relay cannot deactivate) | ||
| C1640 | Coding not completed | |
| C1860 | Abnormality in battery voltage (high voltage) | |
| C1861 | Abnormality in battery voltage (low voltage) | |
| C1864 | G and yaw rate SNSR. power supply voltage | |
| U1073 | Bus-off | |
| U1100 | CAN communications system time out error engine related data | |
| U1101 | CAN communications system time out error A/T related data | |
| U1104 | SAS CAN Timeout/Not equipped | |
| U1120 | CAN communications system TCL uncontrollable by engine malfunction | |
<STEERING WHEEL SENSOR DTC>
DIAGNOSTIC TROUBLE CODE CHART
| DTC | INSPECTION ITEM (M.U.T.-III SCAN TOOL DISPLAY) |
|---|---|
| C1551 | Hall-IC output voltage |
| C1552 | Hall-IC output pattern |
| C1553 | Optical sensor |
| C1554 | Speed sensor is out of range |
| C1555 | Steering angle SNS. out of range |
| C1608 | EEPROM failure |
| U1073 | Bus-off |