Brake Fluid Pressure Sensor Calibration
CAUTION:
Before performing calibration, check that the brake fluid pressure sensor-related diagnosis code is not set.
CAUTION:
After the next operation has been completed, carry out the calibration to make TCL/ASC-ECU learn the neutral position of the brake fluid pressure sensor.
- Brake fluid pressure sensor replacement
- TCL/ASC-ECU replacement
CAUTION:
Always perform the calibration with the brake pedal released (stop lamp switch is turned off).
- Park the vehicle on a level surface.CAUTION: Before connecting or disconnecting M.U.T.-III, always turn the ignition switch to the LOCK (OFF) position.
- Before setting M.U.T.-III, turn the ignition key to the LOCK (OFF) position.
- Turn the ignition switch to the ON position.
- Select "ABS/ASC/ASTC."
- Select "Special function."
- Select "Sensor calibration."
- Select "M/C pressure sensor calibration."
- Before removing M.U.T.-III from the vehicle, turn the ignition key to the LOCK (OFF) position.