Data List Reference Table
The following items can be read by the scan tool from the TCL/ASC-ECU input data.
DATA LIST REFERENCE CHART
| M.U.T.-III SCAN TOOL DISPLAY | ITEM NO. | CHECK ITEM | CHECKING REQUIREMENTS | NORMAL VALUE |
|---|---|---|---|---|
| FL wheel speed sensor | 01 | Front-left wheel speed sensor | Drive the vehicle | Vehicle speeds displayed on the speedometer and scan tool are identical. |
| FR wheel speed sensor | 02 | Front-right wheel speed sensor | ||
| RL wheel speed sensor | 03 | Rear-left wheel speed sensor | ||
| RR wheel speed sensor | 04 | Rear-right wheel speed sensor | ||
| Power supply voltage | 05 | TCL/ASC-ECU power supply voltage | Ignition switch power supply voltage and valve monitor voltage | Battery positive voltage |
| Stoplight switch (input) | 06 | Stoplight switch | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| Lateral G sensor | 08 | Lateral G | Vehicle stopped (level) | -0.11 to 0.11 G |
| Running | -1 to 1 G | |||
| Master cylinder pressure | 10 | Master cylinder pressure | Depress the brake pedal. | Rises depending on the brake pedal depression value |
| Release the brake pedal. | -3 to 3 bar | |||
| Steering angle | 11 | Steering angle | Vehicle stopped (Steering wheel in straight position) | -6 to 6 deg |
| Running | -480 to 480 deg | |||
| Yaw rate sensor | 12 | Yaw rate | Vehicle stopped (level) | -3.5 to 3.5 deg/s |
| Running | -80 to 80 deg/s | |||
| ASC off switch | 28 | ASC mode | ASC OFF switch: ON | OFF |
| ASC OFF switch: OFF | ON | |||
| Master cylinder pressure offset | 47 | Master cylinder pressure offset | The difference between the neutral position that was input to the TCL/ASC-ECU before the master cylinder pressure sensor calibration and the neutral position after the calibration. | -8 to 8 bar |
| Lateral G sensor offset | 49 | Lateral G sensor offset | The difference between the neutral position that was input to the TCL/ASC-ECU before the G sensor calibration and the neutral position after the calibration. | -0.17 to 0.17 G |
| Steering angle offset | 50 | Steering angle offset | The difference between the neutral position that was input to the TCL/ASC-ECU before the steering wheel sensor calibration and the neutral position after the calibration. | -15 to 15 deg |