Multi-Center Display
- General Description
- Diagnosis
- Symptom Chart
- Symptom Procedures
- INSPECTION PROCEDURE 1: The multi-center display does not Show any Information
- INSPECTION PROCEDURE 2: "-" (Ambient air temperature sensor error) is displayed on the ambient air temperature display.
- INSPECTION PROCEDURE 3: The ambient air temperature display does not change normally.
- INSPECTION PROCEDURE 4: On the Audio Screen, "E" cannot Proceed to Next Screen
- INSPECTION PROCEDURE 5: The Compass can not be Calibrated Manually, or Goes Out of Calibration Easily.
- Check At Multi-Center Display Unit Terminal
- Special Tools
- On-Vehicle Service
- Multi-Center Display