Transfer Oil Check
- Remove the engine room under cover front B assembly. (Refer to UNDER COVER .)
- Remove the filler plug and gasket.
- Check that the oil level is not 14 mm (0.6 inch) below the bottom of the oil filler plug hole.
- Check that the oil is not excessively foul and has moderate viscosity.
- If the oil level is not in between the upper limit and the lower limit, refill the specified oil to the bottom of the oil filler plug hole.
Brand name: DiaQueen LSD gear oil
- Install the filler plug and new gasket, then tighten them to the specified torque.
Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb)
- Install the engine room under cover front B assembly. (Refer to UNDER COVER .)