Transmission Assembly: Remove, Install, and Overhaul

Includes: R&I Transaxle Assembly, inspect and replace necessary Transmission components and road test.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
In-Line4,FWD	Serviced as an Assembly.	9.4		A
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
In-Line4, Rear		0.4		B
Combination Procedure: FLYWHEEL: Remove & Replace:
In-Line4		0.2		C
Combination Procedure: TRANSAXLE OIL COOLER: Clean:
In-Line4		0.5		C

4, 5 AND 6 SPEED TRANS

Includes: R&I Transaxle Assembly, inspect and test.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
FWD	Includes: Confirm Fluid temperature for level check. Includes: Programming.	16.7		A
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear		0.4		B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.2		C
Combination Procedure: TRANSAXLE OIL COOLER: Clean:
		0.5		C