Option Coding
CAUTION:
- If there is any item indicated by the option coding after equipment change, set ETACS-ECU so that the option coding data corresponds with the equipment content. Pay attention to that the concerned functions and systems do not work normally if the setting does not correspond with the equipment.
- With the ETACS functions being customized, if any of the ETACS-ECU option coding items are changed, the customized contents are reset. In such case, the functions need to be recustomized.
The ETACS-ECU option coding data can be checked or changed by operating scan tool (M.U.T.-III).
- How to check option coding data
- Connect the scan tool (M.U.T.-III). Refer to HOW TO CONNECT THE SCAN TOOL (M.U.T.-III) .
- Select "MFI" or "ETACS" on the system selection screen.
- Select "Coding."
- Select "Option Coding Information."
- Check the displayed option coding information.
- How to change option coding data
- Connect the scan tool (M.U.T.-III). Refer to HOW TO CONNECT THE SCAN TOOL (M.U.T.-III) .
- Select "MFI" or "ETACS" on the system selection screen.
- Select "Coding."
- Select "Option Coding."
- Change to correct option coding data.
ECM LIST
| Item name |
|---|
| Cruise control |
| Speed limit function |
ETACS-ECU LIST
| Item name |
|---|
| Auto lamp control |
| Keyless entry |
| AUDIO |
| RLS |
| Number of speaker |
| Radio Frequency |
| Front fog lamp |
| Rear fog lamp |
| Horn type |
| Manner switch |
| Remote engine starter |
| AND |
| Compressor type |
| DRL function |
| Wiper washer check bulb |
| ESS Cancel Function |
| EV REMOTE-ECU |
| Security type (EV REMOTE) |
| Panic Alarm |
| Door Unlock Mode Customize |
| Front wiper |