Removal & Installation
WARNING: This page is about the Lancer ES, Automatic CVT Trans, which is a different variant/trim than selected.
4, 5 AND 6 SPEED TRANS
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| FWD | Includes: Confirm Fluid temperature for level check.
Includes: Programming. | 5.8 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Includes: Programming. | 0.6 | | C |
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: |
| | 0.5 | | C |
CVT TRANS
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Includes: Confirm Fluid temperature for level check.
Includes: Programming. | 5.3 | | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| Includes: Programming. | 0.6 | | C |
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: |
| | 0.5 | | C |