Transaxle Assembly: Remove, Install, and Overhaul
WARNING: This page is about the Lancer ES, Automatic CVT Trans, which is a different variant/trim than selected.
4, 5 AND 6 SPEED TRANS
Includes: R&I Transaxle Assembly, inspect and replace necessary Transmission and Differential components and road test.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| FWD | | 7.4 | | A |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: |
| | 0.5 | | C |
CVT TRANS
Includes: R&I Transaxle Assembly, inspect and replace necessary Transmission and Differential components and road test.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Includes: Confirm Fluid temperature for level check.
Includes: Programming. | 6.9 | | A |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| Rear | | 0.4 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: |
| | 0.5 | | C |