Idle COMPENSATOR
- Disconnect vacuum hose at idle compensator. Connect vacuum pump to hose and apply vacuum. If leakage is excessive, replace idle compensator assembly.NOTE: One of the 2 compensator ports must be plugged while checking the other.
- Remove idle compensator. Place idle compensator and thermometer in water. Heat water while watching temperature.
- On Pickup and Stanza models, valve should fully open at 127°F (53°C). On Sentra, 210 and 310 models, one valve should start opening at 140-158°F (60-70°C). The other valve should start opening at 158-176°F (70-80°C). If valve does not operate within specifications, replace idle compensator as an assembly.