October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
With CONSULT-II Scan Tool
- Turn ignition Off.
- Connect CONSULT-II to data link connector. See Fig 1
.
- Start engine.
- Drive vehicle over 20 MPH for at least one minute.
- Stop vehicle, leave engine running and touch START on CONSULT-II screen.
- Touch ABS.
- Touch SELF-DIAG RESULTS. The screen shows the detected malfunction and how many times the ignition switch has been turned since the malfunction.
Courtesy of NISSAN MOTOR CO., U.S.A.