LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P1144 Or DTC P1164 >> DTC Confirmation Test (Using Generic Scan Tool)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Test (Using Generic Scan Tool)

WARNING: This page is about a different car, the 2003 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Set voltmeter probes between ECM harness connector F101 terminal No. 91 (HO2S1 bank 1 signal) or No. 92 (HO2S1 bank 2 signal) and engine ground.
  3. Check one of the following with engine speed held at 2000 RPM constant under no load:
    • Maximum voltage is less than 0.8 volt at least one time.
    • Minimum voltage is less than 0.35 volt at least one time.
  4. If voltage reading is not as specified, go to DIAGNOSTIC PROCEDURE  .
scientia non olet · About LEMON Manuals