LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2289 (Engine Control System - Introduction) >> Basic Service Procedure >> Procedure After Replacing ECM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedure After Replacing ECM

WARNING: This page is about a different car, the 2008 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

When replacing ECM, the following procedure must be performed.

  1. Perform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Refer to "ECM RE-COMMUNICATING FUNCTION ".
  2. Perform "VIN REGISTRATION ".
  3. Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
  4. Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
  5. Perform "IDLE AIR VOLUME LEARNING ".
scientia non olet · About LEMON Manuals