LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Body Control Module) >> BCM (Body Control Module) >> Removal And Installation Of BCM >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation Of BCM: Removal

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to CONFIGURATION  .
  1. Disconnect negative battery cable.
  2. Remove instrument panel storage bin. Refer to INSTRUMENT PANEL REMOVAL AND INSTALLATION .
  3. Remove instrument lower panel LH. Refer to INSTRUMENT PANEL REMOVAL AND INSTALLATION .
  4. Disconnect switch assembly.
  5. Remove screw and release BCM.
  6. Disconnect connectors and then remove BCM.
Fig 1: Locating BCM
G00331702Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals