LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures - Import >> HONDA >> System Readiness Test Codes >> HO2S Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

HO2S Monitor

NOTE: Do not turn ignition off. When negative battery cable is disconnected, all readiness test codes are cleared. Ensure ambient temperature is 20-95°F (-7-35°C).
  1. Connect scan tool to DLC. Start engine, and hold at 3000 RPM under no load condition with transaxle in Park or Neutral until radiator cooling fan comes on. Let engine idle for 5 seconds.
  2. Drive vehicle at a steady speed between 50-62 MPH with transaxle in D4 position for about 2 minutes.
  3. With transaxle in D4 position, decelerate from 62 MPH by completely releasing throttle for at least 5 seconds. If engine is stopped, go back to step  2 and start over. Check for readiness code with scan tool.
scientia non olet · About LEMON Manuals