LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Computer Relearn Procedures) >> PORSCHE >> BOXSTER >> Alarm/Drive Block Control Unit Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Alarm/Drive Block Control Unit Programming

WARNING: This page does not describe the selected car, but rather 135 other vehicles, including the 2000 Volvo V70, 2000 Volvo V40, 2000 Volvo S80, 2000 Volvo S70, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
  1. If control unit requires replacement, new control unit must be coded. It will be necessary to obtain immobilizer (drive block) code and teaching code from Porsche Cars North America (PCNA) prior to replacement. To obtain codes, complete code request form (Technical Bulletin, Boxster bulletin group 9, number 9801) from nearest Porsche dealer. Proof of ownership (valid title or registration) is required. Original transponders can be reused, but require re-coding to new control unit.
  2. Install control unit. Connect Porsche System Tester 2 and turn on. Select BOXSTER and begin control unit search sequence. Select ALARM SYSTEM, TEACHING FUNCTIONS AND IMMOBILIZER. Enter 16-digit immobilizer code obtained from PCNA and press ENTER. Confirm code entry by pressing F7.
scientia non olet · About LEMON Manuals