System Tests: Notes
WARNING: This page is about a different car, the 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not apply voltage of 7.0 volts or greater to the measurement terminals. Use tester with open terminal voltage being 7.0 volts or less. Before harness inspection, turn ignition switch "OFF", disconnect negative battery terminal.
CAUTION:
For harness repair, solder repaired parts, and wrap with tape. do not perform bypass wire connections for repair. The spliced wire will become separated and the characteristics of the twisted line will be lost.