Check Points For Using Consult-II
WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Has CONSULT-II been used without connecting CONSULT-II CONVERTER on this vehicle
- If YES, GO TO 2.
- If NO, GO TO 5.
- Is there any indication other than indications relating to CAN communication system in the self-diagnosis results?
- If YES, GO TO 3.
- If NO, GO TO 4.
- Based on self-diagnosis results unrelated to CAN communication, carry out the inspection.
- Malfunctions may be detected in self-diagnosis depending on control units carrying out CAN communication. Therefor, erase the self-diagnosis results.
- Diagnose CAN communication system. Refer to "CAN COMMUNICATION "