LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Accelerator Control System) >> Accelerator Control System >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine cover. .
  2. Loosen lock nut, and remove accelerator wire from throttle drum.
  3. Remove accelerator wire from accelerator pedal.
  4. Remove accelerator wire bracket bolt and nut, and pull accelerator wire into vehicle interior.
  5. Remove accelerator pedal bracket nuts, then remove accelerator pedal and bracket assembly.
    Fig 1: Removing & Installing Accelerator Wire From Throttle Drum
    G00748675Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals