Final Procedure
WARNING: This page does not describe the selected car, but rather 135 other vehicles, including the 2000 Volvo V70, 2000 Volvo V40, 2000 Volvo S80, 2000 Volvo S70, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If no DTCs exist and SCS is connected, MIL will stay illuminated with ignition on.
This procedure must be performed after any trouble shooting. Remove Service Check Connector (SCS) connector, if connected. Perform ECM/PCM reset procedure. Turn ignition off. Disconnect scan tool.