Generator Specifications
GENERATOR SPECIFICATIONS (1.8L)
| Application | Specification | |
|---|---|---|
| Generator Model | LR180-769, HITACHI | |
| Nominal Rating | 12 Volts, 80 Amps | |
| Ground Polarity | Negative | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1000 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 23 Amps | |
| At 2500 RPM | 66 Amps | |
| At 5000 RPM | 79 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .236 in. (6.00 mm) | |
| Brush Spring Pressure | 3.60-12.34 ozs. (1.000-3.432 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | |
| Rotor (Field Coil) Resistance | 2.67 Ohms | |
GENERATOR SPECIFICATIONS (2.5L)
| Application | Specification | |
|---|---|---|
| Generator Model | LR1100-734, HITACHI | |
| Nominal Rating | 12 Volts, 110 Amps | |
| Ground Polarity | Negative | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 950 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 35 Amps | |
| At 2500 RPM | 83 Amps | |
| At 5000 RPM | 95 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .236 in. (6.00 mm) | |
| Brush Spring Pressure | 3.60-12.34 ozs. (1.000-3.432 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | |
| Rotor (Field Coil) Resistance | 2.31 Ohms | |