Section 1030 (Navigation System)
WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Navigation System
- System Description
- Notes
- Travel Distance
- Travel Direction
- Map-Matching
- GPS (Global Positioning System)
- Component Description
- BIRDVIEW(tm)
- Map Display
- Function Of Center Switch
- Display with Pushed "DEST" button
- Display with Pushed "ROUTE" button
- Display with Pushed "SETTING" button
- Display Setting
- Application Items
- Brightness/Contrast/Map Back ground
- Display Off
- Setting of the under section display
- Vehicle Electronic Systems
- Adjust Driver Seat When Exiting Vehicle
- Return All Settings to Default
- System Settings
- Language Setting
- Clock Settings
- Beep Setting
- Navigation Settings
- "View" Mode
- "Heading" Mode
- "Nearby Display Icons" Mode
- "Save Current Location" Mode
- "Adjust Current Location" Mode
- "Auto Re-Route" Mode
- "Avoid Area Settings" Mode
- "Clear Memory" Mode
- "Edit Address Book" Mode
- "GPS Information" Mode
- "Quick Stop Customer Setting" Mode
- "Set Average Speed" Mode
- "Tracking" Mode
- Guidance Volume
- Display With Pushed "Trip" Button
- Trip 1 Or Trip 2
- Fuel Economy
- Maintenance
- Engine Oil Or Tire Rotation
- Tire Pressure
- Warning Indications
- CAN Communication System Description
- CAN Communication Unit For 2WD Models
- CAN Communication Unit For AWD Models
- Component Parts Location
- Schematic-NAVI-
- Wiring Diagram-NAVI-
- Schematic- COMM -
- Wiring Diagram - COMM -
- Terminals and Reference Value for NAVI Control unit
- Terminals and Reference Value for Display Control unit
- Terminals and Reference Value for Display
- Terminals and Reference Value for A/C and AV Switch
- On Board Self-Diagnosis Function
- Self-Diagnosis Mode (DCU)
- Self-Diagnosis Mode (NAVI)
- CONFIRMATION/ADJUSTMENT Mode
- Can Diag Support Monitor
- A/C and AV Switch Self-Diagnosis Function
- Power Supply and Ground Circuit Check for NAVI Control Unit
- Power Supply and Ground Circuit Check for Display Control Unit
- Power Supply and Ground Circuit Check for Display
- Power Supply and Ground Circuit Check for A/C and AV Switch
- Vehicle Speed Signal Check for NAVI Control Unit
- Vehicle Speed Signal Check for Display Control Unit
- Illumination Signal Check for NAVI Control Unit
- Illumination Signal Check for Display Control Unit
- Ignition Signal Check for NAVI Control Unit
- Ignition Signal Check for Display Control Unit
- Reverse Signal Check for NAVI Control Unit
- Reverse Signal Check for Display Control Unit
- AV Communication Line Check (Between Display Control Unit and NAVI Control
- Audio Communication Line Check (Between Display Control Unit and Audio Unit)
- Display Communication Line Check (Between Display Control Unit and Display)
- AV Communication Line Check (Between Display control unit and A/C and AV switch)
- CAN Communication Line Check
- If NAVI control unit detects that DVD-ROM map is not inserted
- If NAVI control unit detects that inserted DVD-ROM map malfunctioning or if it is impossible to load data from DVD-ROM map
- If Connection Between NAVI Control Unit and GPS Antenna is Malfunctioning
- RGB Screen is Not Shown
- Color of RGB Image is Not Proper (NAVI Screen looks bluish)
- Color of RGB Image is Not Proper (NAVI Screen looks reddish)
- Color of RGB Image is Not Proper (NAVI Screen looks yellowish)
- Color of RGB Image is Not Proper (Excepting NAVI Screen looks bluish)
- Color of RGB Image is Not Proper (Excepting NAVI Screen looks reddish)
- Color of RGB Image is Not Proper (Excepting NAVI Screen looks yellowish)
- RGB Screen is Rolling (NAVI Screen)
- RGB Screen Is Rolling (Excepting NAVI Screen)
- Guide Sound is Not Heard
- Screen is Not Shown
- Audio Screen is Not Shown (NAVI Screen is Shown)
- A/C Screen is Not Shown (NAVI Screen is Shown)
- TRIP, FUEL ECON and MAINTENANCE Screens are Not Shown
- *Average Fuel Economy Displayed is Not Shown ("" is Shown)
- *Distance to Empty Displayed is Not Shown ("is Shown")
- *Driving Distance or Average speed Displayed is Not Shown ("" is Shown)
- WARNING DOOR OPEN Screen is Not Shown
- Wheel Air Pressure is not Displayed
- Unable to Operate All of A/C and AV switches (Unable to start Self-Diagnosis)
- Audio Does Not Work
- A/C Does Not Work
- Navigation System Does Not Activate
- Previous NAVI Conditions Are Not Stored.
- Previous Vehicle Conditions Are Not Stored
- Position of Current-Location Mark is Not Correct
- Radio Wave From GPS Satellite is Not Received
- Driving Test
- Example of Symptoms Judged Not Malfunction
- Notes
- Vehicle Mark
- Destination, Passing Points, And Menu Items Cannot Be Selected/Set.
- Voice Guide
- Route Search
- Examples Of Current-Location Mark Displacement
- Current Location Mark Shows A Position Which Is Completely Wrong
- Current-Location Mark Jumps
- Current Location Mark Is In A River Or Sea
- When Driving On Same Road, Sometimes Current-Location Mark Is In Right Place And Sometimes It Is Wrong Place
- Location Correction By Map-Matching Is Slow
- Although GPS Receiving Display Is Green, Vehicle Mark Does Not Return To Correct Location
- Name Of Current Place Is Not Displayed
- CONTENTS OF DISPLAY DIFFER FOR BIRDVIEW(tm) AND THE (FLAT) MAP SCREEN
- Program Loading of NAVI Control Unit
- Removal and Installation of NAVI control unit
- Removal and Installation of GPS Antenna
- Removal and Installation of Steering Wheel Switch
- Removal and Installation of NAVI Switch
- Removal and Installation of Display
- Removal and Installation of Display Control Unit
- System Description