System Description: Inputs

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Power is supplied at all times

To BCM terminal 55
Through 50A fusible link (letter f , located in the fuse and fusible link box).
To BCM terminal 42
Through 10A fuse [No. 21, located in the fuse block (J/B)].

When the key switch is ON, power is supplied

To BCM terminal 37
Through key switch terminals 1 and 2
Through 10A fuse [No. 21, located in the fuse block (J/B)].

When the key switch is ACC or ON, power is supplied

To BCM terminal 11
Through 10A fuse [No. 6, located in the fuse block (J/B)].

When the key switch is ON or START, power is supplied

To BCM terminal 38
Through 10A fuse [No. 12, located in the fuse block (J/B)].

When the front door switch LH is ON (door is OPEN), ground is supplied

To BCM terminal 62
Through front door switch LH terminal 2
To front door switch LH case ground.

When the front door switch RH is ON (door is OPEN), ground is supplied

To BCM terminal 12
Through front door switch RH terminal 2
To front door switch RH case ground.

When the rear door switch LH is ON (door is OPEN), ground is supplied

To BCM terminal 63
Through rear door switch LH terminal 1
To rear door switch LH case ground.

When the rear door switch RH is ON (door is OPEN), ground is supplied

To BCM terminal 13
Through rear door switch RH terminal 1
To rear door switch RH case ground.

Key fob signal is inputted to BCM (the antenna of the system is combined with BCM).

The remote keyless entry system controls operation of the

Power door lock
Trunk lid opener
Interior lamp and step lamps
Panic alarm
Hazard and horn reminder
Keyless power window down (open)
Auto door lock operation