LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1433 (Accelerator Control System) >> Accelerator Control System >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect accelerator pedal position sensor harness connector.
  2. Loosen nuts, and remove accelerator pedal assembly.
    CAUTION:
    • Do not disassemble accelerator pedal assembly. Do not remove accelerator pedal position sensor from accelerator pedal assembly.
    • Avoid impact from dropping etc. during handling.
    • Be careful to keep accelerator pedal assembly away from water.
scientia non olet · About LEMON Manuals