ASCD Clutch Switch

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector.

Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.

TERMINAL CONTINUITY REFERENCE CHART

Condition	Continuity
Clutch pedal: Fully released	Should exist
Clutch pedal: Slightly depressed	Should not exist

Fig 1: Checking Continuity Between ASCD Clutch Switch Terminals 1 And 2

Courtesy of NISSAN NORTH AMERICA, INC.

If NG, adjust ASCD clutch switch installation, refer to "INSPECTION AND ADJUSTMENT ", and perform step 3 again.