LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Remote Keyless Entry) >> Remote Keyless Entry System >> CONSULT-II Function >> Consult-II Basic Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Consult-II Basic Operation Procedure

WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the ignition switch OFF, connect "CONSULT-II" and "CONSULT-II CONVERTER" to the data link connector on vehicle side, and turn the ignition switch ON.
    Fig 1: Locating Data Link Connector
    G00744151Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
  3. Touch "IVMS".

    If "IVMS" is not indicated, go to CONSULT-II Data Link Connector (DLC) Circuit .

  4. Check the model specification, touch either "WITH SUNROOF" or "WITHOUT SUNROOF".
  5. Touch "OK". If the selection is wrong, touch "CANCEL".
  6. Select the desired part to be diagnosed on the "SELECT TEST ITEM" screen.
scientia non olet · About LEMON Manuals