CONSULT-II Function (ABS): Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown in the CONSULT-II FUNCTION DESCRIPTION (ABS) table.
CONSULT-II FUNCTION DESCRIPTION (ABS)
| ABS diagnostic mode | Description |
|---|---|
| WORK SUPPORT | Supports inspection and adjustments. Commands are transmitted to the ABS actuator and electric unit (control unit) for setting the status suitable for required operation, input/output signals are received from the ABS actuator and electric unit (control unit) and received data is displayed. |
| SELF-DIAG RESULTS | Displays ABS actuator and electric unit (control unit) self- diagnosis results. |
| DATA MONITOR | Displays ABS actuator and electric unit (control unit) input/output data in real time. |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. |
| ACTIVE TEST | Operation of electrical loads can be checked by sending drive signal to them. |
| FUNCTION TEST | Conducted by CONSULT-II instead of a technician to determine whether each system is "OK" or "NG". |
| ECU PART NUMBER | ABS actuator and electric unit (control unit) part number can be read. |