Fuel Pressure Release

With CONSULT-II 

1. Turn ignition switch ON.
2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT-II.
   Fig 1: FUEL PRESSURE RELEASE In WORK SUPPORT Mode - CONSULT-II Screen Display

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Start engine.
4. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
5. Turn ignition switch OFF.

Without CONSULT-II 

1. Remove fuel pump fuse.
   Fig 2: Identifying Fuel Pump Fuse Location

   Courtesy of NISSAN MOTOR CO., U.S.A.
2. Start engine.
3. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
4. Turn ignition switch OFF.
5. Reinstall fuel pump fuse after servicing fuel system.