CONSULT-II Function (ENGINE): Function

CONSULT-II FUNCTION (ENGINE)

Diagnostic test mode

Function

Work support

This mode enables a technician to adjust some devices faster and more accurately by following the indications on the CONSULT-II unit.

Self-diagnostic results

Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip freeze frame data or freeze frame data can be read and erased quickly.⁽¹⁾

Data monitor

Input/Output data in the ECM can be read.

Data monitor (SPEC)

Input/Output of the specification for Basic fuel schedule, AFM, A/F feedback control value and the other data monitor items can be read.

CAN diagnostic support monitor

The results of transmit/receive diagnosis of CAN communication can be read.

Active test Diagnostic

Test Mode in which CONSULT-II drives some actuators apart from the ECMs and also shifts some parameters in a specified range.

Function test

This mode is used to inform customers when their vehicle condition requires periodic maintenance.

DTC & SRT confirmation

The status of system monitoring tests and the self- diagnosis status/result can be confirmed.

ECM part number

ECM part number can be read.

⁽¹⁾	The following emission-related diagnostic information is cleared when the ECM memory is erased.