LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2007 >> Sentra SE-R >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transmission (CVT) >> DTC P1745 Line Pressure Control >> DTC Confirmation Procedure >> With Consult-III
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With Consult-III

  1. Turn ignition switch ON and select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III.
  2. Make sure that output voltage of CVT fluid temperature sensor is within the range below.

    ATF TEMP SEN: 1.0 - 2.0 V 

    If out of range, drive the vehicle to decrease the voltage (warm up the fluid) or stop engine to increase the voltage (cool down the fluid) 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".