System Description
FUEL PUMP DESCRIPTION CHART
| Sensor | Input Signal to ECM | ECM Function | Actuator | ||
|---|---|---|---|---|---|
| Crankshaft position sensor (POS) Camshaft position sensor (PHASE) |
Engine speed(1) | Fuel pump control | Fuel pump relay | ||
| Battery | Battery voltage(1) | ||||
|
|||||
The ECM activates the fuel pump for several seconds after the ignition switch is turned ON to improve engine startability. If the ECM receives a engine speed signal from the crankshaft position sensor (POS) and camshaft position sensor (PHASE), it knows that the engine is rotating, and causes the pump to operate. If the engine speed signal is not received when the ignition switch is ON, the engine stalls. The ECM stops pump operation and prevents battery discharging, thereby improving safety. The ECM does not directly drive the fuel pump. It controls the ON/OFF fuel pump relay, which in turn controls the fuel pump.
FUEL PUMP OPERATION CHART
| Condition | Fuel pump operation |
|---|---|
| Ignition switch is turned to ON | Operates for 1 second |
| Engine running and cranking | Operates |
| Engine: Stopped | Stops in 1.5 seconds |
| Except as shown above | Stops |