Disassembly and Assembly: Assembly

CAUTION: Do not damage strut piston rod when installing components to strut.

Install the Tool (A) to strut and secure it in a vise.
Tool number : ST35652000 ( - )

CAUTION: When installing the Tool to strut, wrap a shop cloth around strut to protect it from damage.

Fig 1: Identifying Special Tool
Courtesy of NISSAN MOTOR CO., U.S.A.
Install lower insulator.
Compress coil spring using tool, and install it onto strut.

Fig 2: Identifying Commercial Service Tool
Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION:
- Face tube side of coil spring downward. Align the lower end to spring lower seat as shown.
- Be sure tool is securely attached to coil spring. Compress coil spring.
  
  Fig 3: Identifying Coil Spring And Spring Seat
  Courtesy of NISSAN MOTOR CO., U.S.A.
Install bound bumper, dust cover and upper insulator.
Attach strut mounting bearing and strut mounting insulator.
- Installation position of strut mounting insulator as shown.
  
  Fig 4: Identifying Strut Mounting Insulator
  Courtesy of NISSAN MOTOR CO., U.S.A.
Secure piston rod tip so that piston rod does not turn, then tighten piston rod lock nut to specified torque.
Gradually release tool, and remove coil spring.
CAUTION: While loosening make sure tool position does not move.
Install cap.
Remove the tool from strut.